Made entirely of plastic quality first, Cintropur filters are suitable for food use and drinking water. The propeller Cintropur turns the water flow in centrifugal effect by throwing the larger particles in the bottom of the tank while the filter sleeve for Cintropur ensures final filtration according to the chosen finesse.
Protection of domestic sanitary water systems, collective and agricultural by filtering the solid particles (earth, sand, rust particles) suspended in water. The protection filter will be ideally placed at the entrance to the facility to protect all the devices connected below.
Protecting health networks supplied with water, rain or well
Water filtration before softener, reverse osmosis or treatment by ultraviolet lamp
Protective sanitary systems, machine tools and production of any industrial water treatment equipment
Water filtration before high pressure cleaners (100-200 bar) or very high pressure (1500-2500 bar)
Filtration irrigation networks
Filtration of water for watering animals
Filtration of rainwater and well water
Low pressure drop
Robust and reliable professional device
Quick and easy lower Purge
Ecological system exclusive and inexpensive filter sleeve (sieve or vlies)
Continuous viewing of the clogging of the filter sleeve (sieve or vlies) through the transparent bell
Cintropur TE model
The NW Cintropur TE is equipped with a strainer tube to receive different products other than water.
Cintropur TE-CTN model
The TE-CTN NW Cintropur filter is equipped with a separate box to fill with activated carbon or other catalytic masses then follow suit in the filter head. Products used to reduce scaling the water heater and boiler:
Polyphosphates - Silicates - Silico-phosphates
Effective up to 60 ° C, these products will be used to reduce the harmful effects and scaling of tartar. The protection of new installations against rust is also a well known application.
Special Cintropur activated carbon and activated carbon special Carbolite
The large pore volume and large surface area make this special activated carbon Cintropur an excellent choice for improving the taste and the removal of odors, reduction of chlorine, ozone and micropollutants such as pesticides and other dissolved organic substances.
When you choose a water filter Cintropur you are sure to acquire equipment performance and guaranteed stability.
Large flow of 3.5 m³ / h up to 30 m³ / h
Low pressure loss due to the large diameter
Fan connections 3/4 "up to 3"
Double filtration level:
Wide range of levels of filtration of 1 to 300 microns (micrometers)
All Cintropur parts are available from stock
Cintropur purge valves (or ball valve) to remove particles
Transparency Cintropur bowl to monitor fouling
Clamps textbooks through torriques seals Cintropur
Maintenance Cintropur very economical, convenient and environmentally friendly:
Reading the symbols used in Cintropur information and Aguagreen
|µm||=||micrometer or micron commonly μ | 1 micron equals 0.000 001 m or 1 millionth of a meter|
|L/m||=||Litre per minute|
|m³/h||=||cubic meter per hour | 1 m³ equals 1000 liters|
|1/8"||=||eighth of an inch | 1/8 corresponds to DN6|
|1/4"||=||quarter of an inch | 1/4 corresponds to DN8|
|3/8"||=||three eighths of an inch | 3/8 corresponds to DN10|
|1/2"||=||half inch | 1/2 corresponds to DN15|
|3/4"||=||three-quarter inch | 3/4 corresponds to DN20|
|1"||=||one inch | 1 inch corresponds to DN25|
|1"1/4||=||1 "1/4 = quarter inch | 1 1/4 inches is DN32|
|1"1/2||=||1/2 an inch and a half | 1 1/2 inches is DN40|
|2"||=||two inch | 2 inches is DN50|
|2"1/2||=||two and a half inches | 2 1/2 inches is DN65|
|3"||=||three inches | 3 inches is DN80|